-Coil Weight: 10,000 lbs.
-Width: 2″ to 32″
-Coil O.D.: 70″ O.D. Entry
64″ O.D. Exit
-Thickness: 0.010″ to 0.105″
-Line Speed: Right to Left
-Speeds: 50 to 345 FPM (Bare Drum Speed)
600 FPM (Coil Build-up Speed)
Consisting of the following:
-Stamco Uncoiler:
Hydraulic Link-Type Expansion
16″ to 20″ ID Range with pads
4 Segment Mandrel
33″ Face Mandrel
Band Brake with Hydraulic Adjustment
Sliding Base
Self-Contained Hydraulic Power Unit
48″ Passline from Floor to center of Mandrel
70″ O.D. Capacity
Overall Size: 140″ L x 70″ W x 66″ High
-Entry Passline Rolls:
4″ Dia. x 34.5″ Face
-Entry Side Guide Rolls:
Manual Adjustment
-Entry Driven Pinch Rolls:
4″ Dia. x 34″ Face
1.5 HP AC Gearmotor Drive
-(2) Slitter Heads:
Crane Removal Type Heads
5″ Dia. x 33″ Face Width Arbors
Double Eccentric Arbor Adjustment
15 HP GE DC Motor, 1175 RPM, 208-220/440 V
Right Angle Reducer W/50.1:1 Ratio
Exit Scrap Guide
47″ Passline
Overall Size: 164″ L x 77″ W x 72″ High
-Tension Stand:
Pad Drag Type
48″ wide Pads
Manual screw adjustment for pressure
Overall Size: 70″ L x 62″ W x 65″ High
-Stamco Recoiler:
S/O: 15358
Machine No.: 2361
20″ Dia. x 35″ Face Drum
Manual Clamp and Expansion
44.5″ Passline from Floor to center of Drum
Hydraulic Pushoff
Overarm Separator
64″ O.D. Capacity
30/40 HP Westinghouse DC Motor w/MG Set
575/1725 RPM, 230 V
Thru Reducer w/26.05:1 Ratio
Electric Holding Brake
Powered lubrication for Gearbox
Overall Size: 134″ L x 84″ W x 77″ High
-Exit 3 Arm Turnstile: Stamco
10,000# Capacity Each Arm
Manual Rotation
Approx. 42″ useable Arm Length
C-Hook Type Arms w/5.5″ W x 6″ High Slot
Passline: 53.5″ from Floor to top of Arms
Overall Size: 114″ L x 97″ W x 80″ High
-Scrap Winder: North Central Machine
Approx. 30″ Dia. x 24″ Wide Scrap Ball
Hydraulic Motor Driven
Clam Shell Type Open/Close thru Hydraulic Cylinder
Hydraulic Cylinder Operated Scrap Oscillating Guide
Self -Contained Hydraulic Power Unit
Overall Size: 77″ L x 60″ W x 77″ High
-Main Electrical Controls:
-Main Operators Control Panel:
Overall Size: 48″ L x 34″ W x 39″ High
-Slitter Tooling:
Knives, Spacers & Rubbers
